Make a Well Disguised Portable Wi-Fi Jammer with 3D Printer
September 24, 2020
Worth a Try New Updates for Least 3D Printing Tree Support
September 26, 2020

Three Must-try 3D Printing Models for 3D Printing Enthusiasts

For 3D printing enthusiasts, whether you are a beginner or a novice who don’t know to slice, or an expert who can revise G-code file to max DIY 3D printed models, you might become confused which to print when facing thousands of 3D printing files of different models on Thingiverse. .

It sometimes might be difficult for rookies to decide how to slice, where to add support, how much layer thickness is ok, which kind of filament is better and even how to record a lapsed video.

Now with abundance information on Anet forum (forum.anet.3d.com), you have easy access not only to introductory tutorials, ready-to-use slicing files, well listed 3D model resource packs for rookies, but also open source modification, advanced printing settings, G-code modification, Raspberry Pi, Arduino, and smart home for experienced 3D printing enthusiasts.

Today we’re introducing to you some recommended 3D models by “Maker’s Muse” on YouTube. Maker’s Muse is a person quite influencing on YouTube who dedicates on 3D printing. He often shares useful information about 3D printing skills, tutorials, and models even with detailed parameters.

1. Print in Place Iris Box remix

The “Print in Place Iris Box Remix is” much like a space telescope kind observatory. You can turn the shaft at the bottom to open or close the blades on the top. It’s a delicate and interesting gadget to print.

More interestingly, it’s a printed one-piece gadget. You may wonder how it works.

And to fulfill its function, you need a high accuracy 3D printer to proceed. And level it very accurately. Settings are also important. You should set layer thickness at 0.1mm, and filling to 30% or higher, and remember do not to add any support. Remember to use high-quality and reliable filaments without breaking possibility, for example the Anet Premium Filament.

2. Nautilus Gears

Nautilus gear might be the easiest for 3D printing rookies. It shapes just as its name. It can be rotated with two gears fixed onto a shaft. Really a good choice for decompression!

It’s easy to slice and you can also refer to “Print In Place Iris Box remix” tutorial.

Please be aware it needs high accuracy and remember checking on “Enable Retraction” option, and set the right temperature for printing.

3. Cube Gears

The Cube Gears is actually my favorite. You’ll see three files for different models but based on same design ideas. They’re easy to print but interesting to play. Under the premise of ensured accuracy, you only need to load all files into printing software and then click “slice”. Also, you can refer to the settings of the “Print in Place Iris Box Remix” tutorial. In addition, do not forget to use top quality filaments and lower printing temperature and speed for better outcome.

You can download Cube Gears files on Thingiverse. For your convenience, we enclosed the link at the end.

“Maker’s Muse” is also an experienced 3D file designer. I also paid for some of his designs. Below are some models printed from his files.

Cubic Square

Tenon and mortise structured gadget

Welcome to visit “Make’s Muse” channel and join our forum (forum.anet3d.com) for detailed information, and share your ideas and printed models.

If you have any questions, please leave your comment below and we’ll reply ASAP.

File Download Links:

Print In Place Iris Box remix


Cube Gears


Nautilus Gears


Maker’s Muse Channel:


Leave a Reply