86 0755-23736621
Service
Services sincere intentions to you

1. Print Not Sticking to the Hotbed

 

Reason 1: Nozzle is far away from the bed.

Solution 1: Adjust the distance of between hotbed and nozzle, the optimal distance is 0.1mm (the thickness of a piece of A4 paper).

 

Reason 2: There is no masking paper or Kapton tape on the hotbed, or there is dust, grease, or oil on the surface of hotbed.

Solution 2: According to the features of different filaments, choose to stick masking paper or Kapton tape on the hotbed, and keep the surface clean.

 

Reason 3: Setting of hotbed temperature.

Different filaments are adapted to different printing temperature. For ABS, recommended hotbed temperature is 70-100. For PLA, recommended hotbed temperature is 50-70℃.

 

 

 

2. Printing Temperature Setting Issue

 

Printing temperature has a very important effect on print quality.

Usually the recommended printing temperature will be labled on filament package. For example,  the PLA printing temperature is 190-230, so what printing temperature should we set?

The answer is uncertain, because same material in different color from same manufacturer may have different melting point, also, different batch of same filaments, the melting point could be different.

So how do we set printing temperature?

For example, initially we can set printing temp 220for PLA, and then observe the extrusion. If the extrusion is normal, we don’t have to change the printing temperature. If there is lack of extrusion, then we need to gradually increase the printing temperature, increase 5each time until the extrusion gets normal. If there is carbonation and the extruded filament truns black, the printing temperature needs to be lowered.

 

 

3. Hotbed Levelling Issue

Hotbed levelling is very important for printing quality

Step of hotbed levelling:

1. Move the extruder to the left-most side of X-axis (in case the nozzle knock down the hotbed when we home the z-axis);

2. Adjust the X-axis to make it level. Use ruler to measure the height of both sides of the X-axis, if it is not even please adjust the flexible couplings on Z-axis to make the X-axis in a horizontal position;

3. Home Z axis;

4. The optimal distance between nozzle and hotbed is 0.1mm (the thickness of a piece of A4 paper). To reach it, you need to move the extruder to left and right sides, and move the hotbed back and forth and do some adjustments. Move the nozzle to the four corners and central of the hotbed one by one, if the distance is not proper, adjust the screw on the hotbed or the nut under the hotbed to make A4 paper get through the gap between nozzle and hotbed exactly. Repeat the above operation until the hotbed is leveled.


 

4. The Settings of Printing slicing parameters

 

As for the setting of printing slicing parameters, there are detailed introductions in the instructions. Here are only few parameters that have a great impact on the printing quality.

1. Thickness: the thickness is smaller, the print model is more delicate.

2. Printing Speed: The lower printing speed, the better printing quality. If you print regular model, you can lift the printing speed appropriately. If you print irregular model, the lower speed gets better quality. 

3. Printing Temperature: please refer to the Printing Temperature Setting, the PLA recommended initial printing temperature is 220℃.


粤ICP备16014147号-1犀牛云提供计算Copyright©2018
Rhino Cloud provide cloud computing services
犀牛云提供云计算服务
ADD:NO.341 Huaqing Ave.,Longhua                       Dist,Shenzhen,Guangdong
TEL: 86 0755-2373 6621
Fax: 86 0755-2373 7721
Email:anet@anet3d.com
Mall:alibaba store aliexpress made-in-china store

SNS:    



< a href=' '>客服系统



< a href='http://en.live800.com'>live chat










X
1

QQ设置

3

SKYPE 设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

5

电话号码管理

6

二维码管理

等待加载动态数据...

等待加载动态数据...

展开
客服
live chat