86 0755-23736621
 News
Your attention to the latest Newsletter
Held together with 3D printed joints and utilizing high-tech The Breath fabric, Japanese architect Kengo Kuma’s “breath/ng” sculpture looks good and does good.Standing at an impressive 6 meters tall, renowned Japanese architect Kengo Kuma‘s breath/ng origami-like sculpture captures the imagination as much as it does pollution in the air.Designed for Dassault Systèmes’ Design in the Age of Experience exhibition at Milan Design Week in April, Kuma’s sculpture is a snaking, winding vessel of hand-folded The Breath panels, making use of 120 panels totaling out to 175 square meters of material.No ordinary art piece, Kuma’s breath/ng serves a practical purpose, in that is can absorb airborne volatile organic compounds (VOCs) and other airborne nasties directly ...
Views: 43
Updated: 2018 - 05 - 03
Recently, a well-known market research institute market.biz released its report on the global 3D printed medical device market in 2017. The report shows that in 2017, the global 3D printed medical device market is expected to reach about 840 million U.S. dollars, by 2023 it is expected to reach 2.21 billion U.S. dollars, and the compound annual growth rate in 2018-2023 is 17.80%. This report is based on a variety of standards equipped with a variety of 3D printing medical device research methods.It is reported that the 3D printing medical equipment market research group conducted investigations through various technical visits. The 3D-printed medical device data in this cell phone is being validated until the end of the study. Through these, the superiority and quality of the content provi...
Views: 28
Updated: 2018 - 05 - 02
According to foreign media New Atlas, nearly two-thirds of all denture wearers in the United States often have so-called denture stomatitis - oral fungal infections. To minimize this number, scientists have recently created 3D-printed dentures that can release drugs that kill fungi. This 3D printed denture was produced by a team led by Dr. Praveen Arany, Ph.D., of the State University of New York at Buffalo. They printed out using polymethyl methacrylate (PMMA), which is currently the standard denture making material. For the outer layer of the denture, the scientists mixed PMMA with biodegradable microspheres filled with the antifungal agent Amphotericin B. These spheres both protect the drug from heat during printing and gradually release as it degrades.In laboratory tests, scientis...
Views: 35
Updated: 2018 - 04 - 28
Headquartered in Pennsylvania, ANSYS Corporation is a global leader in ubiquitous engineering simulation software that helps complex companies such as GE create better products by leveraging their extensive engineering simulation software platform to solve complex design issues. Last year, in order to expand the use of 3D printing simulation, the company acquired 3DSIM to establish the industry's only complete 3D printing simulation workflow. Now, ANSYS will release a new metal 3D printing simulation software solution aimed at changing the way that the biotechnology, automotive, aerospace and defense industries produce metal parts."ANSYS is committed to changing the way products are produced through 3D printing by providing the most powerful and complete solution in the field. The pos...
Views: 73
Updated: 2018 - 04 - 23
The world's largest electronics sourcing fair “2018 Global Sources Consumer Electronics Show“- the first phase “Consumer Electronics Show” was successfully held at the Asia World-Expo in Hong Kong on 11th to 14th April, with about 3,800 booths showed outdoor, automotive, smart home and other electronic products. Shenzhen Anet Technology Co., Ltd. (hereinafter referred to as "Anet") was invited to show the latest 3d printers, and attracted the attention of many overseas buyers.Anet was invited to attend “2018 Global Sources Consumer Electronics Show” 3D printers became focus in the world's largest electronics sourcing fair As the leading manufacturer of 3d printing industry, most of Anet 3D printers are our new products in this exhibition. H...
Views: 247
Updated: 2018 - 04 - 20
Original title: MIT engineers use 3D printing to develop new bandagesIt is reported that MIT engineers used 3D printing technology to develop new types of bandages that are more tight and comfortable than traditional bandages. The new type of bandage is made of a special rubber film that can fit over your skin more. When your knees, elbows or other joints are injured, using traditional bandages will make your joints hard to move, and MIT The new 3D printed bandage developed by the Academy allows you to move freely. The design of the material is inspired by the folding of traditional papers and can also be used for various wearable 3D printing products. New bandages are made by 3D printing of special-shaped molds. Gel RubberThe team developed this material to remain tacky for a long ti...
Views: 50
Updated: 2018 - 04 - 08
69页次10/10HomePrev12345678910NextLast
粤ICP备16014147号-1犀牛云提供计算Copyright©2018
Rhino Cloud provide cloud computing services
犀牛云提供云计算服务
ADD:NO.341 Huaqing Ave.,Longhua                       Dist,Shenzhen,Guangdong
TEL: 86 0755-2373 6621
Fax: 86 0755-2373 7721
Email:anet@anet3d.com
Mall:alibaba store aliexpress made-in-china store
SNS:    
Like :


5
电话
1
QQ
6
二维码
回到顶部
客服
live chat